The MDPE Straight Joiner 50mm to 2" BSPM is a compression fitting that links a 50mm MDPE pipe to a 2" BSP male thread. It’s aimed at plumbers, installers and builders seeking reliable inline connections for water supply and irrigation networks.

Designed to work with MDPE piping, this straight connector enables a direct, in-line join without changing direction. The compression connection helps create a tight seal when properly installed, minimising the risk of leaks in routine service conditions.

• Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa) under typical operating conditions.
• Material and corrosion resistance: Made from MDPE, offering natural resistance to chemical attack and robustness in harsh environmental conditions.
• Leak-free joints: Engineered to deliver reliable seals at the MDPE pipe interface when tightened to the recommended specification.
• Durability: MDPE fittings are designed to withstand temperature variation and mechanical stresses in both outdoor and indoor installations.
• Versatility: Suitable for water supply, irrigation and general industrial piping where a transition to a threaded component is required.
• Ease of installation: No specialist tools are typically needed for a standard compression connection, making it practical for on-site applications.

Use this joiner to connect a 50mm MDPE line to a 2" BSP male threaded outlet, enabling compatible integration with threaded fittings or components in your system. Ensure the PN10 rating aligns with your project requirements and follow best-practice installation to achieve a reliable, leak-free joint. For best results, verify pipe cut square, clean and fully seated in the compression end, and tighten to the manufacturer’s guidelines.